Our firm takes care of loading and shipping the pools. We have lorries, all of them equipped with cranes, to deliver the pools from our factory to the customer.

Digging should be carried out according to the instructions in our installation book, leaving 20cm. around the side of the pool to lay the gravel. After digging the hole, the ground needs to be prepared, smoothing it out to make sure there are no stones left and then laying a bed of 8/12mm gravel to a depth of about 10cm.

Piscines Mon Pra lorries are equipped with cranes enabling them to unload the pool straight into the hole dug for it. In the event that our cranes cannot do the job because of the distance involved, polyester pools can be set in place from overhead or using larger telescopic cranes. Once the pool is in place and the levels adjusted, the walls are filled in with gravel and the projector, skimmer and filtration system installed.

Piscines Mon de Pra offers you a 40cm wide coping stone kit which is entirely compatible with all our pool models. The stone is laid with bonding cement and the joints filled with cement tinted the same colour as the stones.